Events
Date Wednesday, Oct 30, 2019
Location 359 Terry Fox Drive, Kanata, Ontario
Agenda
    11:30 AM – 12:00 PM: Light Lunch and Networking
    12:00 PM – 1:00 PM : Presentation and Q&A
1:00 PM – 1:30 PM  : Post Presentation Networking
Title of the Talk AI-Powered 5G Networks
& Beyond
Speaker  Hatem Abou-zeidÂ
Summary
5G Networks are anticipated
to transform modern societies by providing an ultra-reliable, high-speed
communications infrastructure that will connect billions of devices including
vehicles, machines, and sensors. Both the complexity of such networks and the
diversity of application requirements will be unprecedented. This mandates
novel, autonomous network configuration and operation that can anticipate and
react to changes in traffic, topology, and interference conditions to ensure
seamless quality of experience and reliability. In this talk I will discuss
AI-driven networking use-cases elaborating on the practical challenges of
industrial deployments. I will then highlight directions where research is
needed to further expedite and facilitate the development of AI-powered
networks.
Biography
Hatem Abou-zeid is a
Senior 5G Systems Designer at Ericsson Canada where he drives research and
system development for 5G radio access networks. Prior to that he held
industrial positions at CISCO Systems and Bell Labs in addition to postdoctoral
and research assistant affiliations at Queen’s University, Canada. His research
focuses on the application of machine learning in 5G networks with particular
emphasis on anticipatory and adaptive algorithms drawing on methods from
reinforcement learning, spatio-temporal forecasting, deep learning and
stochastic optimization. Dr. Abou-zeid is very passionate about developing
strong industry-university collaborations that foster applied, innovative
research, and he leads multiple academic partnerships on intelligence and
analytics in future networks.
Title: 5G for Smart Everything: From Smart Meters to the New Power Grid. What is needed to get there ?
Speaker: Akshay Sharma, Executive Research Fellow, neXtCurve: www.next-curve.com
Date/Time:Â Tuesday, November 12, 2019, from 2 – 3 pm.
Admission: Free, but registration is required for security purposes. Please contact by e-mail: branislav @ieee.org or ajit.pardasani@ieee.org.
Abstract: This talk discusses how 5G with Edge Computing, and Ultra-low latency (sub-5ms) with Gigabit speed bandwidth will be a game changer with Smart Meters and a new Electric Grid can be enabled with Smart Lamposts. As we transition to DevOps, AIOps, newer Closed Loop Automation systems will occur. As we connect AI-powered Virtual Personal Assistants to IoT devices in the home, now we have to imagine the entire macro-infrastructures being all hyper-connected. What is needed to get there will be discussed at the seminar.
Â
Speaker’s Bio: Akshay Sharma is originally from Ottawa, B. Eng Computer Systems Engineering from Carleton, a tech analyst, formerly from Gartner, having authored or co-authored over 280 research notes, on emerging technologies like SD-WAN, 5G, mobile video, cloud CDN, IoT, etc. in the past decade. A frequent speaker at tech events, he is often quoted in leading institutions like CNN, Wall St. Journal, etc. He is a former CTO of one of the first video/WiFi smartphone firms, former Chief Architect at Siemens Mobile, and has been given awards by the NJ IEEE Chapter on talks he gave on 5G and Cybersecurity. He is on the tech advisory board for 5G and DevOps startups: LB-N, Kovair, along with others. Mr Sharma’s recent publications include: Search Results for “akshay†– neXt Curve
IEEE Photonics Society Distinguished Lecturer Program
Advanced semiconductor lasers:Ultra-low operating energy and heterogeneous integration with Si photonics devices
Shinji Matsuo, NTT Photonics Laboratories, Japan
Abstract: The electrical power consumed in data transmission systems is now hampering efforts to further increase the speed and capacity at various scales, ranging from data centers to microprocessors. Optical interconnects employing an ultralow energy directly modulated lasers will play a key role in reducing the power consumption. Since a laser’s operating energy is proportional to the size of its active volume, developing high-performance lasers with a small cavity is important. For this purpose, we have developed membrane DFB and photonic crystal (PhC) lasers, in which active regions are buried with InP layer. Thanks to the reduction of cavity size and the increase in optical confinement factor, we have achieved extremely small operating energy and demonstrated 4.4-fJ/bit operating energy by employing wavelength-scale PhC cavity. Reduction of the cost is also important issue because huge number of transmitters are required for short distance optical links. For this purpose, Si photonics technology is expected to be a potential solution because it can provide large-scale phonic integrated circuits (PICs), which can reduce the assembly cost compared with transmitters constructed by discrete devices. Therefore, heterogeneous integration of III-V compound semiconductors and Si has attracted much attention. For fabricating these devices, we have developed wafer-scale fabrication procedure that employs regrowth of III-V compound semiconductors on directly bonded thin InP template on SiO2/Si substrate. A key to realize high-quality epitaxial layer is total thickness, which must be below the critical thickness, typically 430 nm. Thus, membrane structure is quite suitable for heterogeneous integration. I will talk about our recent progress, focusing on ultralow-powerconsumption directly modulated lasers and their photonic integrated circuit. I will also describe progress in heterogeneous integration of these lasers and Si photonics devices.
Bio: Dr. Matsuo received a B.E. and M.E. degrees in electrical engineering from Hiroshima University, Hiroshima, Japan, in 1986 and 1988, and the Ph.D. degree in electronics and applied physics from Tokyo Institute of Technology, Tokyo, Japan, in 2008. In 1988, he joined NTT Optoelectronics Laboratories, Atsugi, where he was engaged in research on photonic functional devices using MQW-pin modulators and VCSELs. In 1997, he researched optical networks using WDM technologies at NTT Network Innovation Laboratories, Yokosuka. Since 2000, he has been researching InP-based photonic integrated circuits including fast tunable lasers and photonic crystal lasers at NTT Photonics Laboratories, Atsugi. Dr. Matsuo is a member of the IEEE Photonics Society, Japan Society of Applied Physics and the Institute of Electronics, Information and Communication Engineers (IEICE) of Japan.
![Special IEEE Lunch and Learn - CTO of Telus - Dr. Ibrahim Gedeon on 5G](https://www.ieeeottawa.ca/wp-content/uploads/2020/02/A2-IBRAHIM-GEDEON_0005D810_2019-298x300.jpg)
“A Candid Conversation on 5G”
Dr. Ibrahim Gedeon
CTO, Telus
Ibrahim Gedeon is one of the global telecommunications industry’s eminent thought leaders. He has carved out an international career by combining tremendous insight and skill as an applied scientist with a lighthearted and non-conventional approach to leadership. As Chief Technology Officer for TELUS a leading national telecommunications company in Canada, he is responsible for all technology development and strategy, security, service and network architecture, service delivery and operational support systems, as well as service and network convergence, and network infrastructure strategies and evolution. Under his leadership the TELUS wireless broadband network has become one of the best in the world.
Ibrahim also serves on the board of the Next Generation Mobile Networks Alliance, the Alliance for Telecommunications Industry Solutions and the Institute for Communication Technology Management. He has a Bachelor’s degree in Electrical Engineering from the American University of Beirut and a Master’s in Electronics Engineering from Carleton University. In 2010, Ibrahim received a Honourary Doctor of Laws degree from the University of British Columbia. In 2014, he was elected as a Fellow of the Canadian Academy of Engineering (CAE) in recognition of his significant contributions to the field of engineering. He has been named five times to the Global Telecoms Business magazine’s GTB Power 100, a list of the 100 most powerful and influential people in the telecoms industry.
Ibrahim served in many IEEE executive and leadership posts on the Society, Region, Section, and Chapter level. He is currently the Senate Chair of IEEE Ottawa Section, the Industry Advisor of the IEEE Communications Society for the North America Region, and the Industry Advisor for the IEEE Consumer Electronics Society. Ibrahim is very well known a keynote speaker, he organized and hosted several national and international conferences. He was the General Chair of the 2012 IEEE International Conference on Communications – ICC2012 (IEEE Communications Society’s flagship conference), and he is currently the General Chair of the 2021 IEEE International Conference on Communications – ICC2021 that will be held in Montreal on June 14-18, 2021. He received many awards, just to name few, the Consumer Electronics Society’s Distinctive Exemplary Industry Leader Award in 2019, and the IEEE Canada’s Outstanding Canadian Engineer Award in 2001.
![Technology Stewardship Workshop @ Vitesse Re-Skilling Canada | Ottawa | Ontario | Canada](https://www.ieeeottawa.ca/wp-content/uploads/2020/01/Microselectronics-300x286.jpg)
Technological Stewardship is a new concept intended to focus on the promise of technology to create a better future for society today and avoid the negative consequences. While Technologies have the promise to address key issues and create a better future, new developments often amplify inequities and create new kinds of risk. What does this mean for how to move
forward?
Through this interactive 2-hour workshop, you will learn about Technological Stewardship and develop your ability to ensure technology makes the world a better place for all. You will also be introduced to a powerful tool for practically integrating these concepts into the product design/development process.
Facilitator:
Mark Abbott is the Executive Director of the Engineering Change Lab, which serves as a catalyst for evolving the engineering community to reach its full potential as stewards of technology for the benefit of humanity. Over the past 5 years, over 125 organizations and 350+ individual leaders (CEOs, VPs, Deans, Directors) have collaborated using the Lab’s platform advancing understanding and action to evolve engineering. Previously, Mark served as member of the Executive Team at Engineers without borders for several years.
This interactive workshop is limited to 45 attendees so as to create an optimal interactive and learning environment. This series of workshops is planned to have subsequent workshops taking place in March and April. We are especially interested in professionals willing to tryout the powerful tools and providing feedback on integrating the concepts into the product design / development process.