Events
IEEE Photonics Society Distinguished Lecturer Program
Advanced semiconductor lasers:Ultra-low operating energy and heterogeneous integration with Si photonics devices
Shinji Matsuo, NTT Photonics Laboratories, Japan
Abstract: The electrical power consumed in data transmission systems is now hampering efforts to further increase the speed and capacity at various scales, ranging from data centers to microprocessors. Optical interconnects employing an ultralow energy directly modulated lasers will play a key role in reducing the power consumption. Since a laser’s operating energy is proportional to the size of its active volume, developing high-performance lasers with a small cavity is important. For this purpose, we have developed membrane DFB and photonic crystal (PhC) lasers, in which active regions are buried with InP layer. Thanks to the reduction of cavity size and the increase in optical confinement factor, we have achieved extremely small operating energy and demonstrated 4.4-fJ/bit operating energy by employing wavelength-scale PhC cavity. Reduction of the cost is also important issue because huge number of transmitters are required for short distance optical links. For this purpose, Si photonics technology is expected to be a potential solution because it can provide large-scale phonic integrated circuits (PICs), which can reduce the assembly cost compared with transmitters constructed by discrete devices. Therefore, heterogeneous integration of III-V compound semiconductors and Si has attracted much attention. For fabricating these devices, we have developed wafer-scale fabrication procedure that employs regrowth of III-V compound semiconductors on directly bonded thin InP template on SiO2/Si substrate. A key to realize high-quality epitaxial layer is total thickness, which must be below the critical thickness, typically 430 nm. Thus, membrane structure is quite suitable for heterogeneous integration. I will talk about our recent progress, focusing on ultralow-powerconsumption directly modulated lasers and their photonic integrated circuit. I will also describe progress in heterogeneous integration of these lasers and Si photonics devices.
Bio: Dr. Matsuo received a B.E. and M.E. degrees in electrical engineering from Hiroshima University, Hiroshima, Japan, in 1986 and 1988, and the Ph.D. degree in electronics and applied physics from Tokyo Institute of Technology, Tokyo, Japan, in 2008. In 1988, he joined NTT Optoelectronics Laboratories, Atsugi, where he was engaged in research on photonic functional devices using MQW-pin modulators and VCSELs. In 1997, he researched optical networks using WDM technologies at NTT Network Innovation Laboratories, Yokosuka. Since 2000, he has been researching InP-based photonic integrated circuits including fast tunable lasers and photonic crystal lasers at NTT Photonics Laboratories, Atsugi. Dr. Matsuo is a member of the IEEE Photonics Society, Japan Society of Applied Physics and the Institute of Electronics, Information and Communication Engineers (IEICE) of Japan.
![Special IEEE Lunch and Learn - CTO of Telus - Dr. Ibrahim Gedeon on 5G](https://www.ieeeottawa.ca/wp-content/uploads/2020/02/A2-IBRAHIM-GEDEON_0005D810_2019-298x300.jpg)
“A Candid Conversation on 5G”
Dr. Ibrahim Gedeon
CTO, Telus
Ibrahim Gedeon is one of the global telecommunications industry’s eminent thought leaders. He has carved out an international career by combining tremendous insight and skill as an applied scientist with a lighthearted and non-conventional approach to leadership. As Chief Technology Officer for TELUS a leading national telecommunications company in Canada, he is responsible for all technology development and strategy, security, service and network architecture, service delivery and operational support systems, as well as service and network convergence, and network infrastructure strategies and evolution. Under his leadership the TELUS wireless broadband network has become one of the best in the world.
Ibrahim also serves on the board of the Next Generation Mobile Networks Alliance, the Alliance for Telecommunications Industry Solutions and the Institute for Communication Technology Management. He has a Bachelor’s degree in Electrical Engineering from the American University of Beirut and a Master’s in Electronics Engineering from Carleton University. In 2010, Ibrahim received a Honourary Doctor of Laws degree from the University of British Columbia. In 2014, he was elected as a Fellow of the Canadian Academy of Engineering (CAE) in recognition of his significant contributions to the field of engineering. He has been named five times to the Global Telecoms Business magazine’s GTB Power 100, a list of the 100 most powerful and influential people in the telecoms industry.
Ibrahim served in many IEEE executive and leadership posts on the Society, Region, Section, and Chapter level. He is currently the Senate Chair of IEEE Ottawa Section, the Industry Advisor of the IEEE Communications Society for the North America Region, and the Industry Advisor for the IEEE Consumer Electronics Society. Ibrahim is very well known a keynote speaker, he organized and hosted several national and international conferences. He was the General Chair of the 2012 IEEE International Conference on Communications – ICC2012 (IEEE Communications Society’s flagship conference), and he is currently the General Chair of the 2021 IEEE International Conference on Communications – ICC2021 that will be held in Montreal on June 14-18, 2021. He received many awards, just to name few, the Consumer Electronics Society’s Distinctive Exemplary Industry Leader Award in 2019, and the IEEE Canada’s Outstanding Canadian Engineer Award in 2001.
Digital Marketing — Tools and Methodologies
Joint presentation IEEE Ottawa Section Consultants Network and IET Ottawa LN
Not your Grandmother’s Marketing – The impact of SaaS and AI
 Since Google’s arrival on the scene in the late 1990’s,
marketing took a turn to digital, never to look back again. With the proliferation of technologies such
as Artificial Intelligence, and novel business models like
Software-as-a-Service (SaaS), marketing tools and techniques continue to
rapidly evolve. Our eyes glued to
screens of devices of all sizes, we are at the same time a willing victim and a
reluctant participant in the marketing dance in both our professional and
personal lives. These combined bring a
huge democratization of marketing for businesses, allowing for successful
growth in the most unlikely locations.
Speaker:Â Dobrila Rancic Moogk
Dobrila is VP Marketing at Giatec Scientific, an IoT company
revolutionizing concrete testing.
Through her work in and with start-ups on strategic marketing, Dobrila’s
passion for accelerating commercialization of innovation results in significant
growth and scale-up. This is combined
with her drive to lead her university students to stellar career starts by
passing on her cutting-edge SaaS marketing skills to the next generation of
business leaders.
 Over her 25 years’
experience in the high-tech industry spanning North America
and Europe, she held marketing and R&D leadership
positions with dynamic corporations such as Bell-Northern Research, LSI
Logic, and MOSAID, among others. Dobrila
has a BSEE, as well as Master of Engineering, and MBA degrees from University
of Ottawa.
 She is a member of
the Board of Directors of Invest Ottawa and Bayview Yards, the Community Impact
Cabinet at United Way East Ontario,
past chair of Volunteer Ottawa, and past vice-chair of the Women in Engineering
and Computer Science at University of
Ottawa.
![Clarifying the Path to becoming a P.Eng. with Representatives from Professional Engineers Ontario](https://www.ieeeottawa.ca/wp-content/uploads/2020/02/WhatsApp-Image-2020-02-02-at-9.07.20-AM-1-300x300.jpeg)
A joint event by IEEE YP & WIE Ottawa!
REGISTER NOW: https://forms.gle/ymzcQyp24vNJhx8K8
WHO? Representatives from Professional Engineers Ontario
WHAT? Clarifying the Path to becoming a P.Eng.
If
you are an engineering undergraduate or post-graduate student, or a
recent graduate starting out your engineering career, then this seminar
might be for you. In it you will learn:
- What is PEO?
- What engineering experience is PEO looking for once I graduate?
- I have international engineering education and experience; how is that evaluated by PEO?
- How is my engineering experience evaluated by PEO?
- How do I prepare my Experience Record?
- What is the PPE?
- What is the EIT Program and the Student Membership program?
WHERE?
Carleton University,
Minto Centre (MC) 5050
Paid Parking Available – carleton.ca/parking/parking-map/
WHEN?
Thursday, February 27th, 2020
6:00PM to 7:30PM
Free for all – You MUST pre-register!
REGISTER NOW: https://forms.gle/ymzcQyp24vNJhx8K8
NOTE: This event as been cancelled due to COVID-19 precautions
Seminar presented by the IEEE Ottawa Section, Communications Society, Consumer Electronics Society, and
Broadcast Technology Society Joint Chapter (ComSoc/CESoc/BTS), Instrumentation & Measurement
Society Chapter (IMS), Reliability Society and Power Electronics Society Joint Chapter (RS/PELS), IEEE
Ottawa Educational Activities (EA) and Algonquin College IEEE Student Branch:
IEEE Ottawa Section is inviting all interested IEEE members and nonmembers to a distinguished Lecture:
Drone-assisted Mobile Edge Computing
By
Nirwan Ansari, Distinguished Professor of Electrical and Computer Engineering at
the New Jersey Institute of Technology (NJIT)
Â
DATE:
Thursday, March 19, 2020.
Â
TIME:
Refreshments, Registration and Networking: 6:00 p.m.; Seminar: 6:30 p.m. – 7:30 p.m.
PLACE:
Ciena Optophotonics Lab, Room T129, T-Building, School of Advanced Technology, Algonquin College,
1385 Woodroffe Ave., Ottawa, ON Canada K2G 1V8.
Â
PARKING:
Parking at Lots 8 and 9 after 5 p.m. is $5 flat rate, pay at a machine and display the ticket on your dashboard. Please respect restricted areas.
ADMISSION:
Free. Registration required. To ensure a seat, please register by e-mail contacting: Wahab Almuhtadi.
Â
MORE INFO:
Ottawa ComSoc/CESoc/BTS Chapter website.
Abstract:
In mobile access networks, different types of Internet of Things (IoT) devices (e.g., sensor nodes and smartphones) will generate vast traffic demands, thus dramatically increasing the traffic loads of their connected access nodes, especially in the 5G era. Mobile edge computing enables data collected by IoT devices to be stored in and processed by local fog nodes as well as allows IoT users to access IoT applications via these nodes at the same time. In this case, the communications latency critically affects the response time of IoT user requests. Owing to the dynamic distribution of IoT users, drone base station (DBS), which can be flexibly deployed over hotspot areas, can potentially improve the wireless latency of IoT users by mitigating the heavy traffic loads of macro BSs. Drone-based communications poses two major challenges: 1) DBS should be deployed in suitable areas with heavy traffic demands to serve more users; 2) traffic loads in the network should be allocated among macro BSs and DBSs to avoid instigating traffic congestions. Therefore, we propose a TrAffic Load balancing (TALL) scheme in such drone-assisted fog network to minimize the wireless latency of IoT users. In the scheme, we divide the problem into two sub-problems and design two algorithms to optimize the DBS placement and user association, respectively. Extensive simulations have been set up to validate the performance of TALL.
Speaker Bio:
Dr. Nirwan Ansari, Distinguished Professor of Electrical and Computer Engineering at the New Jersey Institute of Technology (NJIT), received his Ph.D. from Purdue University, MSEE from the University of Michigan, and BSEE (summa cum laude with a perfect GPA) from NJIT. He is a Fellow of IEEE and a Fellow of National Academy of Inventors.
He authored Green Mobile Networks: A Networking Perspective (Wiley-IEEE, 2017) with T. Han, and coauthored two other books. He has also (co-)authored more than 600 technical publications. He has guest-edited a number of special issues covering various emerging topics in communications and networking. He has served on the editorial/advisory board of over ten journals including as Associate Editor-in-Chief of IEEE Wireless Communications Magazine. His current research focuses on green communications and networking, cloud computing, droneassisted networking, and various aspects of broadband networks. He was elected to serve in the IEEE Communications Society (ComSoc) Board of Governors as a member-at-large, has chaired some ComSoc technical and steering committees, is current Director of ComSoc Educational Services Board, has been serving in many committees such as the IEEE Fellow Committee, and has been actively organizing numerous IEEE International Conferences/Symposia/Workshops. He is frequently invited to deliver keynote addresses, distinguished lectures, tutorials, and invited talks. Some of his recognitions include several excellence in teaching awards, a few best paper awards, the NCE Excellence in Research Award, several ComSoc TC technical recognition awards, the NJ Inventors Hall of Fame Inventor of the Year Award, the Thomas Alva Edison Patent Award, Purdue University Outstanding Electrical and Computer Engineering Award, the NCE 100 Medal, and designation as a COMSOC Distinguished Lecturer. He has also been granted more than 40 U.S. patents.