Events
![Modern Day Applications of Power Electronics – Who Can Benefit?](https://www.ieeeottawa.ca/wp-content/uploads/2019/11/28Nov-2019-300x192.jpg)
Abstract – Application of power electronics is widespread in everyday
life. Some applications are considered as “nice to have it;†in other cases,
they are essential. This presentation discusses a wide variety of daily-used
applications around the world. Also covered is an advanced topic, such as SMART
Controller that today’s grid requires for voltage regulation, power factor
regulation, unbalance voltage/current regulation, harmonic elimination and so
on. A SMART Controller that is based on functional requirements and
cost-effective solutions is derived from utilizing the best features of all the
technical concepts that are developed until now. Final year students of
electrical engineering undergraduate curriculum, post graduate students,
researchers, academicians and utility engineers will benefit from attending
this course. The participants will hear from an expert who actually designed
and commissioned a few utility-grade SMART controllers since their inception in
the 1990s.
Â
Speaker’s
Bio
Kalyan Sen, a
Fulbright Scholar, is the Chief Technology Officer of Sen Engineering
Solutions, Inc. (www.sentransformer.com) that specializes in
developing SMART power flow controllers—a functional requirements-based and
cost-effective solution. He received
BEE,
MSEE, and PhD degrees, all in Electrical Engineering, from Jadavpur University,
India, Tuskegee University, USA, and Worcester Polytechnic Institute, USA,
respectively. He also received an MBA from Robert Morris University, USA.
Â
Dr.
Sen spent more than 30 years in academia and industry and became a Westinghouse
Fellow Engineer. He was a key member of the Flexible Alternating Current
Transmission Systems (FACTS) development team at the Westinghouse Science &
Technology Center in Pittsburgh. He contributed in all aspects (conception,
simulation, design, and commissioning) of FACTS projects at Westinghouse. He
conceived some of the basic concepts in FACTS technology. He has authored or
coauthored more than 25 peer-reviewed publications, 8 issued patents, a book
and 4 book chapters in the areas of FACTS and power electronics. He is the
coauthor of the book titled, Introduction
to FACTS Controllers: Theory, Modeling, and Applications, IEEE Press and
John Wiley & Sons, Inc. 2009, which is also published in Chinese and Indian
paperback editions. He is the co-inventor of Sen Transformer.
![Modern Day Applications of Power Electronics – Who Can Benefit? @ Room P208, Algonquin College | Ottawa | Ontario | Canada](https://www.ieeeottawa.ca/wp-content/uploads/2019/10/28Nov-2019-300x192.jpg)
Seminar by IEEE Ottawa Section, PELS, SSIT, RS-PEL, PES, Education Activities, Algonquin College IEEE Student Branch, ComSoc, CESoc, and BTS Ottawa Joint Chapter.
The IEEE Ottawa Section is inviting all interested IEEE members and nonmembers to a seminar
Modern Day Applications of Power Electronics – Who Can Benefit?
ByÂ
Kalyan K. Sen
Sen Engineering Solutions, Inc.
DATE:
November 28th 2019
TIME:
Refreshments, Registration and Networking: 18:00;
Seminar: 18:30 – 20:00.
PLACE:
Algonquin College, Room P208, 1385 Woodroffe Ave., Ottawa.
PARKING:
Parking in Lots 8 and 9 after 5 p.m. is $5 flat rate, pay at a
machine and display the ticket on your dashboard.
ADMISSION:
Free. Registration required.
Please register by e-mail contacting: ottawapels@gmail.com
Abstract:
Application of power electronics is widespread in everyday life. Some applications are considered as “nice to have it;†in other cases, they are essential. This presentation discusses a wide variety of daily-used applications around the world. Also covered is an advanced topic, such as SMART Controller that today’s grid requires for voltage regulation, power factor regulation, unbalance voltage/current regulation, harmonic elimination and so on. A SMART Controller that is based on functional requirements and cost-effective solutions is derived from utilizing the best features of all the technical concepts that are developed until now. Final year students of electrical engineering undergraduate curriculum, post graduate students, researchers, academicians and utility engineers will benefit from attending this course. The participantswill hear from an expert who actually designed and commissioned a fewutility-grade SMART controllers since their inception in the 1990s.
Modern Day Applications of Power Electronics – Who Can Benefit
IEEE Photonics Society Distinguished Lecturer Program
Advanced semiconductor lasers:Ultra-low operating energy and heterogeneous integration with Si photonics devices
Shinji Matsuo, NTT Photonics Laboratories, Japan
Abstract: The electrical power consumed in data transmission systems is now hampering efforts to further increase the speed and capacity at various scales, ranging from data centers to microprocessors. Optical interconnects employing an ultralow energy directly modulated lasers will play a key role in reducing the power consumption. Since a laser’s operating energy is proportional to the size of its active volume, developing high-performance lasers with a small cavity is important. For this purpose, we have developed membrane DFB and photonic crystal (PhC) lasers, in which active regions are buried with InP layer. Thanks to the reduction of cavity size and the increase in optical confinement factor, we have achieved extremely small operating energy and demonstrated 4.4-fJ/bit operating energy by employing wavelength-scale PhC cavity. Reduction of the cost is also important issue because huge number of transmitters are required for short distance optical links. For this purpose, Si photonics technology is expected to be a potential solution because it can provide large-scale phonic integrated circuits (PICs), which can reduce the assembly cost compared with transmitters constructed by discrete devices. Therefore, heterogeneous integration of III-V compound semiconductors and Si has attracted much attention. For fabricating these devices, we have developed wafer-scale fabrication procedure that employs regrowth of III-V compound semiconductors on directly bonded thin InP template on SiO2/Si substrate. A key to realize high-quality epitaxial layer is total thickness, which must be below the critical thickness, typically 430 nm. Thus, membrane structure is quite suitable for heterogeneous integration. I will talk about our recent progress, focusing on ultralow-powerconsumption directly modulated lasers and their photonic integrated circuit. I will also describe progress in heterogeneous integration of these lasers and Si photonics devices.
Bio: Dr. Matsuo received a B.E. and M.E. degrees in electrical engineering from Hiroshima University, Hiroshima, Japan, in 1986 and 1988, and the Ph.D. degree in electronics and applied physics from Tokyo Institute of Technology, Tokyo, Japan, in 2008. In 1988, he joined NTT Optoelectronics Laboratories, Atsugi, where he was engaged in research on photonic functional devices using MQW-pin modulators and VCSELs. In 1997, he researched optical networks using WDM technologies at NTT Network Innovation Laboratories, Yokosuka. Since 2000, he has been researching InP-based photonic integrated circuits including fast tunable lasers and photonic crystal lasers at NTT Photonics Laboratories, Atsugi. Dr. Matsuo is a member of the IEEE Photonics Society, Japan Society of Applied Physics and the Institute of Electronics, Information and Communication Engineers (IEICE) of Japan.
Digital Marketing — Tools and Methodologies
Joint presentation IEEE Ottawa Section Consultants Network and IET Ottawa LN
Not your Grandmother’s Marketing – The impact of SaaS and AI
 Since Google’s arrival on the scene in the late 1990’s,
marketing took a turn to digital, never to look back again. With the proliferation of technologies such
as Artificial Intelligence, and novel business models like
Software-as-a-Service (SaaS), marketing tools and techniques continue to
rapidly evolve. Our eyes glued to
screens of devices of all sizes, we are at the same time a willing victim and a
reluctant participant in the marketing dance in both our professional and
personal lives. These combined bring a
huge democratization of marketing for businesses, allowing for successful
growth in the most unlikely locations.
Speaker:Â Dobrila Rancic Moogk
Dobrila is VP Marketing at Giatec Scientific, an IoT company
revolutionizing concrete testing.
Through her work in and with start-ups on strategic marketing, Dobrila’s
passion for accelerating commercialization of innovation results in significant
growth and scale-up. This is combined
with her drive to lead her university students to stellar career starts by
passing on her cutting-edge SaaS marketing skills to the next generation of
business leaders.
 Over her 25 years’
experience in the high-tech industry spanning North America
and Europe, she held marketing and R&D leadership
positions with dynamic corporations such as Bell-Northern Research, LSI
Logic, and MOSAID, among others. Dobrila
has a BSEE, as well as Master of Engineering, and MBA degrees from University
of Ottawa.
 She is a member of
the Board of Directors of Invest Ottawa and Bayview Yards, the Community Impact
Cabinet at United Way East Ontario,
past chair of Volunteer Ottawa, and past vice-chair of the Women in Engineering
and Computer Science at University of
Ottawa.
![Clarifying the Path to becoming a P.Eng. with Representatives from Professional Engineers Ontario](https://www.ieeeottawa.ca/wp-content/uploads/2020/02/WhatsApp-Image-2020-02-02-at-9.07.20-AM-1-300x300.jpeg)
A joint event by IEEE YP & WIE Ottawa!
REGISTER NOW: https://forms.gle/ymzcQyp24vNJhx8K8
WHO? Representatives from Professional Engineers Ontario
WHAT? Clarifying the Path to becoming a P.Eng.
If
you are an engineering undergraduate or post-graduate student, or a
recent graduate starting out your engineering career, then this seminar
might be for you. In it you will learn:
- What is PEO?
- What engineering experience is PEO looking for once I graduate?
- I have international engineering education and experience; how is that evaluated by PEO?
- How is my engineering experience evaluated by PEO?
- How do I prepare my Experience Record?
- What is the PPE?
- What is the EIT Program and the Student Membership program?
WHERE?
Carleton University,
Minto Centre (MC) 5050
Paid Parking Available – carleton.ca/parking/parking-map/
WHEN?
Thursday, February 27th, 2020
6:00PM to 7:30PM
Free for all – You MUST pre-register!
REGISTER NOW: https://forms.gle/ymzcQyp24vNJhx8K8